Midea CAC Introduction
Midea Product Portfolio
Products Show
Product Details
Suspended Type Air Handling Unit adopts unitary structure design, more outstanding
cold-bridge free performance, lower air leakage and more elegant appearance. Different
external static pressure (ESP) can be customized to meet different kinds of applications.
Product Advantages
1.Orientation
2.High strength, high reliability
Panels are double skin with injection of high density polyurethane. The outer skin is
anti-corrosion color-coated steel sheet. the inner skin is galvanized steel sheet. The unit
cabinet consists of panels attaching to each other by combining with male and female
aluminum alloy cards and sealing strip, tighten with concealed bolts.
3.Outstanding cold-bridge free structure
The density of polyurethane injection is 50kg /m' (thermal conductivity factor Ks0.0224W/m?K).
Unit cabinet is constructed by panels with male and female aluminum alloy cards and sealing
strip. The service door (or service panel) is plastic-steel frame with polyurethane injection
panel and rubber sealing strip.
4.Low air leakage rate
Double skin. panel, unitary structure design, less connecting joints, multi sealing strips in the
contact surfaces, around sealing service door/panel, all ensure almost total air can be supplied
to the air-conditioned room. The air leakage fate is less than 0.29%, Units will not sweat when
exterior room temperature Is 27*C, relative humidity is 90%.
Simple structural components
Less at-site work
5.High performance heat exchanger
Copper pipe and aluminum fin type heat exchanger, optimal choice of fin spacing and number
of rows.
Fins are coated with anticorrosive layers, assure longer coil life and lower maintenance cost.
Optimal water circuits design, increased heat exchange efficiency and decreased water
resistance, improving unit performance efficiency.
Projects Show
About Beijing Midea Overseas
Our Company Advantages
Midea Product Portfolio
Products Show
Product Details
Suspended Type Air Handling Unit adopts unitary structure design, more outstanding
cold-bridge free performance, lower air leakage and more elegant appearance. Different
external static pressure (ESP) can be customized to meet different kinds of applications.
| Air volume | 2000-15000m³/h |
| Rated cooling capacity | 11.2-107.0kw |
| Rated heating capacity | 18.6-169.0kw |
| External static pressure | 67-305Pa |
| Fan motor input | 0.37-5.50kw |
| Water pressure drop | 19-59kpa |
| Drain pipe | DN25 |
| Sound level | 58.0-71.8dB(A) |
| Power supply | 380-415V/3Ph/50Hz |
Product Advantages
1.Orientation
Unit handling orientation Is determined by location of pipe connection while facing unit in the
direction of air flow. The unit below is left-handed connection unit, otherwise is right-handed
connection unit.
direction of air flow. The unit below is left-handed connection unit, otherwise is right-handed
connection unit.
2.High strength, high reliability
Panels are double skin with injection of high density polyurethane. The outer skin is
anti-corrosion color-coated steel sheet. the inner skin is galvanized steel sheet. The unit
cabinet consists of panels attaching to each other by combining with male and female
aluminum alloy cards and sealing strip, tighten with concealed bolts.
3.Outstanding cold-bridge free structure
The density of polyurethane injection is 50kg /m' (thermal conductivity factor Ks0.0224W/m?K).
Unit cabinet is constructed by panels with male and female aluminum alloy cards and sealing
strip. The service door (or service panel) is plastic-steel frame with polyurethane injection
panel and rubber sealing strip.
4.Low air leakage rate
Double skin. panel, unitary structure design, less connecting joints, multi sealing strips in the
contact surfaces, around sealing service door/panel, all ensure almost total air can be supplied
to the air-conditioned room. The air leakage fate is less than 0.29%, Units will not sweat when
exterior room temperature Is 27*C, relative humidity is 90%.
Simple structural components
Less at-site work
5.High performance heat exchanger
Copper pipe and aluminum fin type heat exchanger, optimal choice of fin spacing and number
of rows.
Fins are coated with anticorrosive layers, assure longer coil life and lower maintenance cost.
Optimal water circuits design, increased heat exchange efficiency and decreased water
resistance, improving unit performance efficiency.
Projects Show
About Beijing Midea Overseas
Our Company Advantages